Bike Talk motorcycle forum

my weekend is fixin to start. 4 days of fishing!!!! fishing the TEXAS state bass tourney. y'all have fun and stay safe, cause im gonna!!!!!! see ya sunday nite!!!!!!!!!!!!!

Going on a trip at the end of the month & was thinking about a faring bra for my FLHTi. I ordered the bra from Hales H-D w/Bar & Shield stainless trim.
As I stood back a few feet observing the installed product...I just shook my head & removed the bra & trim.JMO--This had to be the Crappiest accessory I've ever purchased through Harley.The product most likely serves it's function,It's just really Cheap looking.I opted for a bottle of wax & micro fiber towels in my hard bags.:roflmao: :: Yeah,I'm kinda anal about a clean ride.00 wildglide

I just picked up a FXE '78 1/2 that has some fire damage. I want to do some things to it like a 200mm rear tire and rake the neck with a 8" over front end. Where can I find a replacement swingarm or a change to a softtail look that will take a 200mm rear tire. I have been searching without any luck. I should be able to cut the frame and re-weld it for the rake that I need.

Thanx

Ed

Hey! guy's well the 120"Ultima might be proving to much for the clutch set up. hotroadking, I believe you mentioned I might not have enough clutch set for it.Well the break in is done and of course when I tried to turn all those ponies loose thats when I find, maybe not enough clutch? Last year when I put the Ultima 6 speed in it also did the whole primary. cogs ,chain,hydrolic tensioner.kevlar clutch kit with the extra plates to do away with that stock double friction plate crap! 30 percent heavier spring also new pressure plate. I'm running 20/50 Amsoil in the primary. 1st 2nd 3rd 4th are good. I've felt it slip in 5th and 6th. Other then that, it's all good. The clutch is in proper adjustment. Reading thru some threads I see some about using ATF.What do you think?

Need to repalce the lower motor mount on a 02" RK police bike. Have the service manual, but having a little trouble getting the front of the motor up high enough to get the old one out. Any ideas?

Thanks