-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
Mar
05
here is the 95 flh still working on it but I have been driving her alot. The pictures aren't that good
Rich
index
Rich
index
Mar
05
I have a 1995 flh I wanted to replace the pistons and I figured since I have the jugs off I should replace the stock piston with 10.5 to 1 / dome style pistons, is there anything I should know or will this be a simple swap? I am also looking at doing the cam any suggestions? one more question I noticed the rear cylinder pipe (tru dual ) smoking ( blue ) mostly when I decelerate would this be the valve seals?
Thanks
Rich
index

Thanks
Rich
index

Mar
05
I recently bought a '93 Fatboy that had stock tail/brake light and Alen Ness wisper type signals in the licence plate. The front signals are also Ness blocks hung from the mirrors. It has a Badlands Equalizer under the seat and all worked fine. I replaced the tail/brake light with a diamond shaped LED (red, blue, black wire) and now the brake/tail light flashes with the signals...either side. The back fender is fiberglass.....so I have run the black wires from the tail/brake light and signals to a ground point on the frame near battery. The badlands was wired black to battery and purple and brown to signals..only two wires from this unit plus ground. I have tried independantly grounding the wires, grounding the badlands to frame etc....I have charged the battery fully and tried while...
Mar
05
Just bought 07 R.K flhr love the bike.Put lowing shocks on the rear.installed reach seat from h.d. The front is my next step.well as you can read from above i'm short. the rear shocks helped. But needed a little more.i'm a shop foreman for a trucking co. i can do the work myself but not sure of the steps i need to take to do it right.looking for some advice. and is it worth the effort and i'm two up 90% of the time. And is getting the seat narrowed the step i should try frist
Mar
05
I have one of those fairing/stash boxes on my 99 Fatboy and was wondering if anyone might have a cover for it. They had them listed in J&P but apparently Kuryakyn has stopped selling them separately.
Thanks
Thanks
Page 1669 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM
