Bike Talk motorcycle forum

Thinking about going up to Sacramento,CA. for the EASY RIDER bike show.Any of you folks going?I usually go every year,skipped last year though due to work schedule:rant: .If I go it will most likely be Sunday the 21st.
00 wildglide

Need some suggestions. My brother just bought an 05' Road Glide with EFI. The bike is totally stock. He isn't going to do any engine work on it at this time. He has a 92' FLHS with a stroked EVO, so he has his go fast bike.

On the Road Glide all he plans doing is installing a high flow breather and new slip on's. Any suggetions on what slip on mufflers to go with would be appreciated.

So Chuck....I see were getting reruns on your avatar, and I was just wondering, is it due to the writers strike? :roflmao: :roflmao:

Hey guys,
I just found a real confusing problem with my 1997 Electraglide. While getting a service on the bike at the dealer, they pointed out that my rear tire was rubbing on the inner fender support bracket (Left side). If you sight down the bike from the rear while on the lift, everything on the bike seems to look lined up. I put a leveling tool on the rear fender, rear shocks, rear brake disc, and the swing arm everything looked straight and not out of whack. The dealer replaced the front motor mount (Was bad), and I asked them to see if the other mounts were damaged or can be adjusted. The wheel bearings and axle were checked and found to be fine, and there is no rubbing or tweeking of the drive belt either. They returned the bike to me saying that they didn't find any problems...

This is an ongoing project. I have owned the bike since 1981. It was showing it's age, not quite a rat bike, but getting there. Then one day the comp ufire electronic ignition module I had installed took a dump and left me stranded. One of the very few times this bike has ever been on a trailer. I decided to go back to points and rewire it. While I was at it I rpainted it. The top part is a mixture of candy root beer and candy red. The bottom is an off whie with very little gold pearl. I wanted it to look traditional so I didn't put a lot of artwork on it, no skulls or flames but shoot I had to do a little somthin' so I did the oil hoses using SEM sure coat. You can twist those hoses every which way but not crack the paint, cool stuff. I also made the tank divider (which I see was...