Bike Talk motorcycle forum

What are the case capacities [oil, primary, tranny] on a '03 TC88 engine?
Any negative or positive feedback/results on using Syn3 in the tranny and primary?

I have 1993 FLHTC coming home form work volt meter jump to 17 volts for two blocks then drop back to 14 volts were its runs . and jump to 17 volts again and drop back to 14 volts. HELP HELP

when i test my plug wires i get about 2.5 omhs on the short one and 6.6 on the long one. i did this with the wires cold. i have two questions:

1. what is the normal range

2. should they be tested cold or hot

3. why don't i just say and buy new ones and skip all this:gah:

hi. have old gas in bike. gas is two years old. is there an additive I can use or do I have to drain it and if so can some one till me what happens to the gas thanks

Looks like the swap meet hasn't had any action in a while so I'm just sticking a note here too

Good set of 60's from Andrews, cams only no gears, excellent shape ready to install, taking them out of a 103 and going to a different cam after motor and head work.

These cams have about 1 year of use


Good deal at $225 Obo

plus shipping via ups from FL to you

Pulling them out tonight putting in some higher lift cams into a 103
these would be a good set for someone with a hot 95 or 103 motor.