Bike Talk motorcycle forum

Just like to know if the new 96ci. motor top half will fit the older 88ci. motor. It sonds like they just whet from a 95ci. to a96ci. thanks ? Henry

is it possible to install a set of slip ons' on my system and not have the fuel injection remapped. i'm looking for a bit different sound but do not want to change the performance.

Just rewired whole bike (89 FXLR) and it fired right up and ran great, but after a trip around the block I had no lights at all, tail or headlight. Totally smoked the halogen head light and blew out both filaments on the taillight. Overcharging? Voltage Regulator problem? I read the FAQ section on this and it seems easy to test and will do so tomorrow but was wondering if anyone had experienced anything like this before and if there is anything I need to do special to that electrical system after having all of the pieces off of it. I feel all of the wires are clean and free of shorts, etc. that might be giving me grief...Thanks guys in advance.

Urban Legends Reference Pages: The Golden Compass

i hope this movie is banned in all theaters and kidman rots!!!!!!!:cussing:

Has anyone have experience with the fueling super pump. I'm changing over to gear drive cams and am considering changing the oil pump while I have it apart. Fueling claims a 40% increase in pressure volume and 60% increase in scavenge volume. My question is, are the oil ports in the TC88 large enough to allow 40% more oil flow or will this pump just create more oil pressure.

My logic is this, if I have a 1/2" hose connected to a pump that pumps 100 gpm and I increase the pump size to 200gpm, will the 1/2" hose be large enough to take the additonal volume, or will I just have a flow of 100gpm at a higher pressure? So with the Fueling pump am I really getting more oil flow or just the same amount at a higher pressure?

What about the oil filter, will it also flow the additional...